BOYSEN® Acrytex™ Cast B‑1711
BOYSEN® Acrytex™ Cast B‑1711
Regular price
₱0.00 PHP
Regular price
Sale price
₱0.00 PHP
Unit price
per
BOYSEN® Acrytex™ Cast is an acrylic solvent-based putty for hairline cracks and minor surface imperfections less than 1 mm when a plain finish of BOYSEN® Acrytex™ Topcoat is desired. It gives an elegant and durable textured finish when applied with a mortar gun. It is watertight, able to repel water and prevent seepage. It is noted for its excellent adhesion and long-term durability.
Technical Data
Principal Uses
For new and previously painted interior and exterior masonry and wooden surfaces.
SURFACE PREPARATION
For Concrete
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
For Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
Repainting
Any existing paint that is not Acrytex should be completely removed. Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete, use BOYSEN® Chalk Blocker™ B‑7304 as surface conditioner if surface is chalky. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
PAINTING SCHEDULE
Plain Finish
1. Prime bare substrate with BOYSEN® Acrytex™ Primer B‑1705
2. Putty minor surface imperfections with BOYSEN® Acrytex™ Cast B‑1711
3. Spot prime puttied areas with BOYSEN® Acrytex™ Primer B‑1705
4. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
2. Putty minor surface imperfections with BOYSEN® Acrytex™ Cast B‑1711
3. Spot prime puttied areas with BOYSEN® Acrytex™ Primer B‑1705
4. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
Textured Finish
1. Prime bare substrate with BOYSEN® Acrytex™ Primer B‑1705
2. Spray BOYSEN® Acrytex™ Cast B‑1711 using a mortar gun. For a flattened texture, press Acrytex Cast B‑1711 using a plain wooden roller 10-15 minutes after spraying.
Note: Dampen wooden roller with water to prevent the roller from sticking to the cast.
3. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
2. Spray BOYSEN® Acrytex™ Cast B‑1711 using a mortar gun. For a flattened texture, press Acrytex Cast B‑1711 using a plain wooden roller 10-15 minutes after spraying.
Note: Dampen wooden roller with water to prevent the roller from sticking to the cast.
3. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
