Dutch Boy® Gloss Masta™ Quick Drying Enamel

Dutch Boy^® Gloss Masta™ Quick Drying Enamel is a multi-purpose, superfine alkyd enamel with an exceptionally hard-wearing, brilliant gloss finish. It may be used for the interior or exterior painting of properly primed wood and metal surfaces.

SURFACE PREPARATION: 
Wooden Surfaces
Surfaces to be painted should be clean and dry, free from oil, grease, dust, dirt, and all loose grit and mortar. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. 

Scrape off all loose, scaling, flaking, and peeling paint manually. Wash surfaces clean and completely remove chemical residue. Let it dry then prime with Dutch Boy^® Classic™ Flatwall Enamel before recoating.

Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new, galvanized surfaces, etch the surface by applying a metal etching solution. Rinse with water and dry immediately. 

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched. 

For recoating pre-painted galvanized surfaces in good condition, sand lightly wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces, remove rust by wire brushing and use a metal etching solution. Let it stay for 10-15 minutes. Be sure to wash surface thoroughly with water and solvent wipe to dry. Immediately prime after drying.

APPLICATION: 
Stir well before using. Apply by brush, roller, or spray.

CLEAN UP  SOLVENT: 
Dutch Boy^® Paint Thinner 6000